Arohx Paints Private Limited
Rajkot, Gujarat
GST No. 24ABACA3542K1ZW
Call 08046056816 75% Response Rate
Send Enquiry
Epoxy Based Paints
| 1 | Epoxy Base Primer |
| 2 | Epoxy Paints all Shade |
| 3 | Epoxy Thinner |
| 4 | Epoxy Zinc Phosphate Primer |
Epoxy Based Top Coat
Minimum Order Quantity: 100 Kg
| Packaging Size | 20 ltr |
| Brand | Arohx |
| Color | Multilpe |
| No. Of Components | Two Component |
We are an eminent entity, engaged in offering best quality Epoxy Based Top Coat All Shade to our clients. Only pristine quality chemical compounds are used to process the offered range, for increased compliance with set industrial standard. It is widely acknowledged and applauded by the clients for its featuring variegated attributes like accurate composition, remarkable quality and long shelf life. Furthermore, our entire range is stringently monitored by our professionals on various parameters.
Features:
Well processed
Water resistance
Longer shelf life
Specifications:
Generic Type: Two Component
Composition: Polyamide/polyamine cured Epoxy Top Coat Clear or suitably pigmented
Recommended Use: Recommended for use in chemical plants, fertilizer plants, petrochemical complexes and where ever the excellent chemical resistance with abrasion resistance and decorative finish are required i.e. bulk storage tanks. plants, equipment structures etc. This coating is having very good resistance against salty water & weathering, Excellent adhesion, Excellent anti corrosive properties
Surface Preparation: All surface to be coated must be dry, free of dust, dirt, oils, moisture and any other surface contaminants
Typical Physical and Film Properties:
Properties
Mixing ratio75 : 25 (Base: Hardener) By volumeColorAs per customer requirementFinishSmoothGlossGlossy/Semi Glossy/MattFlexibilityGoodTheoretical spreading rate11 to 13 sq. Mt./ltr.Pot life6-8 hrs. at 25°CFlash PointAbove 30°CSolids by volume41 %Application of methodBy spraying/by brushingThinnerEpoxy ThinnerRecommended D.F.T.25 - 29 MicronsSurface dry1 hrs. Max (at 28°C 60±5 R.H)Dry to handle24 Hrs.Fully cured7 daysCompatibilityCan be top coated with Epoxy and P.U. PrimerOver coating intervalMin 8 Hrs., Max 24 Hrs.Chemical ResistanceGoodAbrasion ResistanceGoodShelf Life12 months stored under proper condition of temp & pressure
Packing: 4 & 20 Ltrs.
Note: The information given is to the best of our Knowledge, Since conditions under which our products may be used are beyond control, recommendations are made without warranty or guarantee.
View Complete details
Epoxy Based Primer
| Packaging Size | 20 Kg |
| Usage/Application | Industrial |
| Color | White |
| Application Method | Spray gun |
| Form | Liquid |
With hard-earned experience of our skilled professionals, we are able to provide a wide range of Epoxy Based Primer. The offered primer is processed and quality tested by our experienced professionals on industry developed parameters. This range is not only processed using chemical compounds but also packed precisely to make the safe transit at the clients’ end.
Features:
Accurate composition
High shelf life
Easily applied
Product Details:
Epoxy Based Primer: (Epoxy Z/C Yellow Primer/Epoxy Z/C Red Oxide Primer/Epoxy Z/P Red Oxide Primer/Epoxy Z/P Surfacer Grey Primer)
Generic Type: Two Component
Composition: Poly amide/polyamide cured Epoxy based primer containing Zinc phosphate, Zine chromes as corrosion inhibiting pigment
Recommended Use: Recommended as Primer on M.S, AI and GI surface for use in chemical plats, fertilizer plants, petrochemical complexes, thermal Power plants, off shope and on shore installation, Ships, Nuclear plants, etc. This Coating is having very good resistance against salty water & heating, Excellent adhesion, excellent anti corrosive properties
Surface Preparation: All surface to be coated must be dry, free of dust, dirt, oils, Moisture and any other contaminants
Typical Physical and Film Properties:
PropertiesMixing ratio75:25 (Base: Hardener) by volumeColorAs per customer requirementFinishSmoothGlossSemi Glossy/MattFlexibilityGoodTheoretical spreading rate11 to 13sq. Mt./ltr.Pot life6-7 hrs. at 25°CFlash PointAbove 30°CSolids by volume41%Application of methodBy spraying/by brushingThinnerEpoxy ThinnerRecommended D.F.T.30-34 MicronsSurface dry1 hrs. Max (at 28°C 60±5 R.H)Dry to handle24 HrsFully cured7 daysCompatibilitycan be top coated with P.U, Epoxy, C.R, top CoatsOver coating intervalMin 8 Hrs. Max 24 HrsChemical ResistanceGoodAbrasion ResistanceGoodShelf life12 months stored under proper condition of temp & pressure
Packing: 4 & 20 Ltrs.
Note: The information give is to the best of our Knowledge, Since condition under which our products may be used are beyond control, recommendation are made without warranty or guarantee.
View Complete details