Apollo Coating Industries

With an aim to fulfill the diversified requirements of our precious clients, we bring forth an exclusive range of Auto Finish Top Coat (Sold/Metallic). Our offered range is precisely processed using advanced technology and following international standard. After being processed, the entire range is rigorously tested on well defined parameters to deliver the defect free range at the clients’ end.

Features:

Easily applied

Precise composition

Safe packaging

Specifications:

Generic Type: Single Pack

Composition: Fast dry resin based top coat clear or pigmented

Recommended Use : Recommended for use in automotive industries, machinery and for general purpose where as high gloss, fast drying weather resistance and outdoor extra durability

Surface Preparation: All surface to be coated must be dry, free of dust, dirt, oils, moisture and any other surface contaminants

Typical Physical and Film Properties:

PropertiesColorAs per customer requirementFinishSmoothGlossGlossy/Semi Glossy/MattFlexibilityGoodTheoretical spreading rate11 to 13 sq. Mt./ltr.Flash PointAbove 30°CSolids by volume40 %Application of methodBy spraying/ by brushingThinnerF.D. ThinnerRecommended D.F.T.25 - 30 MicronsSurface dry5 – 10 minutesDry to handle24 Hrs.CompatibilityCan be top coated with A.F., PU, Epoxy, C.R PrimerOver coating intervalMin 8 hrs. Max 24 hrs.Chemical ResistanceGoodAbrasion ResistanceGoodShelf Life12 months stored under proper condition of temp & pressure

Packing: 4 & 20 Ltrs.

Note: The information given is to the best of our Knowledge, Since condition under which our products may be used are beyond control, recommendation are made without warranty or guarantee.

• Good gloss
• High shelf life

• Generic Type: One Component
• Composition: TSA based stoving top coat clear or suitable pigmented
• Recommended Use: Recommended as paint on M.S., Al and Gl Surface for stoving process used in corrosion and water resistance in auto farm equipment. TSA stoving used in home appliance as celling fen, M.S. and brass handle. This coating is having very good gloss, super other property
• Surface Preparation: All surface to be coated must be dry, free of dust, dirt, oils, moisture and any other surface contaminants